Roll over image to zoom in
Arduino UNO SMD R3 ATmega328p
₹411.00₹1000.00 inc.GST (-59%)
- Input Voltage(Recommended) : 7-12V
- DC Current for 3.3V Pin (mA) : 50
- DC Current per I/O Pin (mA) : 40
- Operating Temperature (°C) : -40 to 90
- Microcontroller Chip : ATmega328 (SMD) – Interface CH340G
- Operating Voltage (VDC) : 5V
- Analog I/O Pins : 8
- Digital I/O Pins : 14 (of which 6 provide PWM output)
- PWM Digital I/O Pins : 6
- DC Current for 3.3V Pin (mA) : 50
- DC Current per I/O Pin (mA) : 40
- Clock Speed : 16 MHz
- SRAM (KB) : 2
- EEPROM : 1 KB (ATmega328)
- Power Supply Option : DC Jack or USB
- On Board LEDs : On/Off, L (PIN 13), TX, RX
- Dimensions in mm (LxWxH) : 75 x 54 x 12
Description
The Arduino Uno SMD R3 is a microcontroller board based on the ATmega328. It has 14 digital input/output pins (of which 6 can be used as PWM outputs); 6 analog inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started.
Specification
Additional information
| Weight | 200 kg |
|---|---|
| Dimensions | 10 × 6 × 1 cm |
by Britteny Brox
This website was… how do I say it? Relevant!! Finally I’ve found something that helped me. Thank you!