fbpx

ARDUINO UNO R3 Micro Controller Board with Cable

740.00900.00 inc.GST (-18%)

Out of stock

Model Type UNO Rev R3
Microcontroller Chip ATmega328
Operating Voltage (VDC) 5
Input Voltage(Recommended) 7-12V
Input Voltage (limit) 6-20V
Analog I/O Pins 6
Digital I/O Pins 14 (of which 6 provide PWM output)
PWM Digital I/O Pins 6
DC Current per I/O Pin (mA) 40
DC Current for 3.3V Pin (mA) 50
Clock Speed 16 MHz
SRAM (KB) 2
EEPROM 1 KB (ATmega328)
Flash Memory 32 KB
On Board LEDs On/Off, L (PIN 13), TX, RX
Dimensions in mm (LxWxH) 75 x 54 x 12
Weight (gm) 28 (without cable)
54 (with cable)
Compare
SKU: Arduino & cable- 600 Categories: , ,

The Arduino Uno R3 with Cable is a microcontroller board based on the ATmega328. It has 14 digital input/output pins (of which 6 can be used as PWM outputs); 6 analog inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button.

It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started.

Additional information

Weight 250 kg
Dimensions 10 × 6 × 1 cm
Be the first to review “ARDUINO UNO R3 Micro Controller Board with Cable”

Your email address will not be published.

Reviews

There are no reviews yet.

See It Styled On Instagram

    Instagram did not return a 200.

Main Menu

ARDUINO UNO R3 Micro Controller Board with Cable

740.00900.00 inc.GST (-18%)